Posts made by eulalush82234

@cyriac

@admin please reply....

Hello Team,

One question regarding websocket re-connection in the event of a disconnection.

Got this error today:

[W 260601 11:56:13 smartWebSocketV2:319] Attempting to resubscribe/reconnect (Attempt 1)...
[W 260601 11:56:27 smartWebSocketV2:319] Attempting to resubscribe/reconnect (Attempt 2)...
[W 260601 11:56:30 smartWebSocketV2:319] Attempting to resubscribe/reconnect (Attempt 3)...

After that it seemed like the websocket reconnected. But the token ticks did not come. My question is, if there is a disconnection and re-connection made, should we resubscribe to the tokens again?

Please let me know.

Best Regards

Hi @admin @Moderator_1 @Moderator_2 ,

Can you please reconfirm the rate limits for Market Quote?

I still don't think it is correct.

Here is the output from my code. It ran from 11:45 to about 12:11 then returned error. As you can see, I am only making a single call to the end point every 2 to 3 seconds. Which is about 20 per minute and 1200 every hour. This is well within the limit of 10 per second, 500 a minute and 5000 per hour.

Also, if there are 40 tokens are called for just LTP is it considered as one call or 40 calls? (According to the documentation it should be considered as just 1 call... Still this wont explain the issue).

Regards

Cyriac

12 Mar - 11:44:46: Bank Nifty Index Open_Price: 47351.35
12 Mar - 11:44:50: Tokens: ['99926009', '41845', '41856', '41858', '41867', '41875', '41880', '41889', '41892', '41894', '41899', '41908', '41912', '41914', '41916', '41918', '41921', '41927', '41937', '41939', '41946', '41950', '41855', '41857', '41866', '41873', '41879', '41882', '41890', '41893', '41897', '41901', '41911', '41913', '41915', '41917', '41920', '41925', '41935', '41938', '41944', '41949', '41951']
12 Mar - 11:45:55: Table created successfully.
12 Mar - 12:11:55: An error occurred: HTTPSConnectionPool(host='apiconnect.angelbroking.com', port=443): Max retries exceeded with url: /rest/secure/angelbroking/market/v1/quote/ (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x00000000129154F0>: Failed to establish a new connection: [WinError 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond'))
12 Mar - 12:13:54: Failed to fetch data: Access denied because of exceeding access rate
12 Mar - 12:13:56: Failed to fetch data: Access denied because of exceeding access rate
12 Mar - 12:13:59: Failed to fetch data: Access denied because of exceeding access rate
12 Mar - 12:14:08: Failed to fetch data: Access denied because of exceeding access rate
12 Mar - 12:14:11: Failed to fetch data: Access denied because of exceeding access rate
12 Mar - 12:14:17: Failed to fetch data: Access denied because of exceeding access rate
12 Mar - 12:14:19: Failed to fetch data: Access denied because of exceeding access rate
12 Mar - 12:14:22: Failed to fetch data: Access denied because of exceeding access rate

Hi @admin @Moderator_1 @Moderator_2 ,

Facing the below issue with Market Quote End Point after just about 10 to 15 minutes. As you can see it is within the limit of 1 per second.

My Question: Is there is there some extra limit like maximum 500 calls per day?

11 Mar - 11:06:31: Failed to fetch data: Access denied because of exceeding access rate
11 Mar - 11:06:33: Failed to fetch data: Access denied because of exceeding access rate
11 Mar - 11:06:36: Failed to fetch data: Access denied because of exceeding access rate
11 Mar - 11:06:39: Failed to fetch data: Access denied because of exceeding access rate
11 Mar - 11:06:41: Failed to fetch data: Access denied because of exceeding access rate
11 Mar - 11:06:44: Failed to fetch data: Access denied because of exceeding access rate
11 Mar - 11:06:47: Failed to fetch data: Access denied because of exceeding access rate
11 Mar - 11:06:50: Failed to fetch data: Access denied because of exceeding access rate
11 Mar - 11:06:52: Failed to fetch data: Access denied because of exceeding access rate

Sorry - I mean to say that LTP data is coming, but gets cut in a few seconds....

Hi @admin @Moderator_1 @Moderator_2 ,

I am facing this issue while trying to subscribe to just 5 tokens for just LTP. But note that the LTP data is not coming.

I am not sure if the issue is related to some previous connection that may be open since I have been playing around with the websocket-V2 code since morning.

If so how exactly to close/remove the previous websocket connections?

Or is it some other issue?

Thanks in advance

Cyriac

PyDev console: starting.
Python 3.8.9 (tags/v3.8.9:a743f81, Apr 6 2021, 14:02:34) [MSC v.1928 64 bit (AMD64)] on win32

on open
Ticks: {'subscription_mode': 1, 'exchange_type': 2, 'token': '39320', 'sequence_number': 42423890, 'exchange_timestamp': 1709542347000, 'last_traded_price': 44485, 'subscription_mode_val': 'LTP'}
Ticks: {'subscription_mode': 1, 'exchange_type': 2, 'token': '39321', 'sequence_number': 42423740, 'exchange_timestamp': 1709542347000, 'last_traded_price': 20735, 'subscription_mode_val': 'LTP'}
Ticks: {'subscription_mode': 1, 'exchange_type': 2, 'token': '39326', 'sequence_number': 42424284, 'exchange_timestamp': 1709542347000, 'last_traded_price': 24520, 'subscription_mode_val': 'LTP'}
Ticks: {'subscription_mode': 1, 'exchange_type': 2, 'token': '39325', 'sequence_number': 42423847, 'exchange_timestamp': 1709542347000, 'last_traded_price': 38295, 'subscription_mode_val': 'LTP'}
Ticks: {'subscription_mode': 1, 'exchange_type': 2, 'token': '39328', 'sequence_number': 42423889, 'exchange_timestamp': 1709542347000, 'last_traded_price': 32565, 'subscription_mode_val': 'LTP'}
Ticks: {'subscription_mode': 1, 'exchange_type': 2, 'token': '39338', 'sequence_number': 42423739, 'exchange_timestamp': 1709542347000, 'last_traded_price': 28815, 'subscription_mode_val': 'LTP'}
Ticks: {'subscription_mode': 1, 'exchange_type': 2, 'token': '39325', 'sequence_number': 42425407, 'exchange_timestamp': 1709542347000, 'last_traded_price': 38080, 'subscription_mode_val': 'LTP'}
[W 240304 14:22:26 smartWebSocketV2:319] Attempting to resubscribe/reconnect (Attempt 1)...
on open
Ticks: {'subscription_mode': 1, 'exchange_type': 2, 'token': '39320', 'sequence_number': 42451808, 'exchange_timestamp': 1709542359000, 'last_traded_price': 43785, 'subscription_mode_val': 'LTP'}
Ticks: {'subscription_mode': 1, 'exchange_type': 2, 'token': '39321', 'sequence_number': 42452193, 'exchange_timestamp': 1709542359000, 'last_traded_price': 21060, 'subscription_mode_val': 'LTP'}
Ticks: {'subscription_mode': 1, 'exchange_type': 2, 'token': '39326', 'sequence_number': 42450167, 'exchange_timestamp': 1709542358000, 'last_traded_price': 24865, 'subscription_mode_val': 'LTP'}
Ticks: {'subscription_mode': 1, 'exchange_type': 2, 'token': '39325', 'sequence_number': 42451888, 'exchange_timestamp': 1709542359000, 'last_traded_price': 37645, 'subscription_mode_val': 'LTP'}
Ticks: {'subscription_mode': 1, 'exchange_type': 2, 'token': '39328', 'sequence_number': 42451807, 'exchange_timestamp': 1709542359000, 'last_traded_price': 32045, 'subscription_mode_val': 'LTP'}
Ticks: {'subscription_mode': 1, 'exchange_type': 2, 'token': '39338', 'sequence_number': 42452187, 'exchange_timestamp': 1709542359000, 'last_traded_price': 29185, 'subscription_mode_val': 'LTP'}
Ticks: {'subscription_mode': 1, 'exchange_type': 2, 'token': '39326', 'sequence_number': 42452287, 'exchange_timestamp': 1709542359000, 'last_traded_price': 24860, 'subscription_mode_val': 'LTP'}
Ticks: {'subscription_mode': 1, 'exchange_type': 2, 'token': '39326', 'sequence_number': 42452693, 'exchange_timestamp': 1709542359000, 'last_traded_price': 24865, 'subscription_mode_val': 'LTP'}
[W 240304 14:22:38 smartWebSocketV2:343] Connection closed due to max retry attempts reached.
[W 240304 14:22:38 smartWebSocketV2:343] Connection closed due to max retry attempts reached.
[W 240304 14:22:38 smartWebSocketV2:343] Connection closed due to max retry attempts reached.
Connection closed
Connection closed
Connection closed

Hi @admin and @Moderator_1 , @Moderator_2

Just a quick question here. I am looking to be able to calculate the margin for Options via API. The above end point should work fine, but I am wondering how to implement it for Option sell position when an buy position is already open.

As you are aware, there is a difference in margin calculations for naked sell and covered sell. So please can you give some information regarding this.

Many Thanks

Cyriac

@Moderator_2 @Moderator_1

Great to see this!

Dear Traders,

If you feel that the Admins should respond more to our outstanding queries, please upvote and comment on this post.

Really, Angel has the potential to become the best broker in India for Algo traders, but there is no follow up and adequate quality control for the API.

Hoping that Angel will devote more resources to the API Team.

Regards
Cyriac

@Vignesha Adding a small delay usually reduces the number of errors usually.

@admin The reason there are so many errors is that often many traders are using get_position constantly. This is because the web socket 2.0 is often failing. Sometimes, if the get_holdings returns stale LTP, often I have to write a custom function that will get_holdings and loop for all stocks to get LTP. So if I have 5 stocks in my holdings, instead of one call to the API, I have to make 6 calls. The Angel API is being overworked. Please try to fix these....

@xzion

This is the greatest unresolved mystery in the universe currently....

;-(

@psm007 @admin

I face this issue frequently while using get_position endpoint. Although it is well within the limits specified in the documentation....

https://smartapi.angelbroking.com/docs/RateLimit

@psm007 The limits are per second in theory, but not too sure about practice unfortunately....

Hi @admin

Getting this new error today. Not too sure what the issue is? Code is same as yesterday which worked fine. No changes made.

ConnectionError: HTTPSConnectionPool(host='apiconnect.angelbroking.com', port=443): Max retries exceeded with url: /rest/auth/angelbroking/user/v1/loginByPassword (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x00000286A29BC850>: Failed to establish a new connection: [WinError 10048] Only one usage of each socket address (protocol/network address/port) is normally permitted'))

Please do share your thoughts if possible
Thanks
Cyriac

@admin Very Useful. Thanks !

@admin All my posts are unable to be posted saying queued for approval

Request you to do the needful.

Thanks

@ARTraders007 @admin

Could you please clarify the exact status of Robo orders?

Under which conditions it will work and which conditions it will not work?

Whether we can cancel the SL and Target orders via API or not?

Clarity is essential!

Hi Admin @admin

Getting this error several times when I run my Algo.
Any thoughts? Thanks in Advance.
Cyriac

Traceback (most recent call last):
File "C:\Users\user\AppData\Local\Programs\Python\Python38\lib\site-packages\urllib3\connection.py", line 174, in _new_conn
conn = connection.create_connection(
File "C:\Users\user\AppData\Local\Programs\Python\Python38\lib\site-packages\urllib3\util\connection.py", line 95, in create_connection
raise err
File "C:\Users\user\AppData\Local\Programs\Python\Python38\lib\site-packages\urllib3\util\connection.py", line 85, in create_connection
sock.connect(sa)
socket.timeout: timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
File "C:\Users\user\AppData\Local\Programs\Python\Python38\lib\site-packages\urllib3\connectionpool.py", line 703, in urlopen
httplib_response = self._make_request(
File "C:\Users\user\AppData\Local\Programs\Python\Python38\lib\site-packages\urllib3\connectionpool.py", line 386, in _make_request
self._validate_conn(conn)
File "C:\Users\user\AppData\Local\Programs\Python\Python38\lib\site-packages\urllib3\connectionpool.py", line 1042, in _validate_conn
conn.connect()
File "C:\Users\user\AppData\Local\Programs\Python\Python38\lib\site-packages\urllib3\connection.py", line 358, in connect
self.sock = conn = self._new_conn()
File "C:\Users\user\AppData\Local\Programs\Python\Python38\lib\site-packages\urllib3\connection.py", line 179, in _new_conn
raise ConnectTimeoutError(
urllib3.exceptions.ConnectTimeoutError: (<urllib3.connection.HTTPSConnection object at 0x00000000077CCBE0>, 'Connection to apiconnect.angelbroking.com timed out. (connect timeout=7)')

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
File "C:\Users\user\AppData\Local\Programs\Python\Python38\lib\site-packages\requests\adapters.py", line 489, in send
resp = conn.urlopen(
File "C:\Users\user\AppData\Local\Programs\Python\Python38\lib\site-packages\urllib3\connectionpool.py", line 787, in urlopen
retries = retries.increment(
File "C:\Users\user\AppData\Local\Programs\Python\Python38\lib\site-packages\urllib3\util\retry.py", line 592, in increment
raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='apiconnect.angelbroking.com', port=443): Max retries exceeded with url: /rest/secure/angelbroking/order/v1/getPosition?%7B%7D (Caused by ConnectTimeoutError(<urllib3.connection.HTTPSConnection object at 0x00000000077CCBE0>, 'Connection to apiconnect.angelbroking.com timed out. (connect timeout=7)'))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
File "E:\Python\2. X Basic Trade Algo.py", line 212, in <module>
get_position()
File "E:\Python\2. X Basic Trade Algo.py", line 94, in get_position
positions = obj.position()["data"]
File "C:\Users\user\AppData\Local\Programs\Python\Python38\lib\site-packages\smartapi\smartConnect.py", line 331, in position
positionResponse= self._getRequest("api.position")
File "C:\Users\user\AppData\Local\Programs\Python\Python38\lib\site-packages\smartapi\smartConnect.py", line 223, in _getRequest
return self._request(route, "GET", params)
File "C:\Users\user\AppData\Local\Programs\Python\Python38\lib\site-packages\smartapi\smartConnect.py", line 180, in _request
raise e
File "C:\Users\user\AppData\Local\Programs\Python\Python38\lib\site-packages\smartapi\smartConnect.py", line 169, in _request
r = requests.request(method,
File "C:\Users\user\AppData\Local\Programs\Python\Python38\lib\site-packages\requests\api.py", line 59, in request
return session.request(method=method, url=url, **kwargs)
File "C:\Users\user\AppData\Local\Programs\Python\Python38\lib\site-packages\requests\sessions.py", line 587, in request
resp = self.send(prep, **send_kwargs)
File "C:\Users\user\AppData\Local\Programs\Python\Python38\lib\site-packages\requests\sessions.py", line 701, in send
r = adapter.send(request, **kwargs)
File "C:\Users\user\AppData\Local\Programs\Python\Python38\lib\site-packages\requests\adapters.py", line 553, in send
raise ConnectTimeout(e, request=request)
requests.exceptions.ConnectTimeout: HTTPSConnectionPool(host='apiconnect.angelbroking.com', port=443): Max retries exceeded with url: /rest/secure/angelbroking/order/v1/getPosition?%7B%7D (Caused by ConnectTimeoutError(<urllib3.connection.HTTPSConnection object at 0x00000000077CCBE0>, 'Connection to apiconnect.angelbroking.com timed out. (connect timeout=7)'))

@admin Any chance there is some sample code for this?

Thanks

@admin Please Help.

Thank You

Hello Admin,
Can you advise on how to get the MTM (Live PnL) of an Intraday position?

I am using the Python SDK and have seen the "Get Position" command. Though this does not return the MTM specifically.

Thank you in advance.

Cyriac